|
1. Must input correct
password to arm or disarm
this system.
2. When this system is
armed, if someone try to
invade, this system will
initiate siren first then
dialing out to user. Users
can setup two groups of
phone number. If one line
is busy the system will
automatically dialing the
other one (Two cycles for
each group of telephone
numbers). After user picks
up the call, the system will
send out one of the
prerecorded voices
according to event.
3. No matter if the system
is armed/disarmed, push
emergency key will
always initiate the
system alarm procedure.
4. After the system is
armed, the only way to
disarm is inputting
correct password. There is
no other way including
physical damage to disarm
the system.
5. This system does have
anti-tampering function.
Physical damage to
the system will initiate
alarm procedure.
6. User can change the
system set up by themselves.
Such as zone bypass, turn
on/off the siren,
password, entry/exit delay
time, phone numbers,
etc. Important default can
add extra secret code
protection.
7. This system has a LCD
screen guide, easy to
operate.
8. Zones can be selectively
armed.
9. Auto battery charging,
with a dedicated chip which
manage charging
and discharging of the
batteries. When power is
off, battery will keep
system.
10. There is battery voltage
warning function.
11. If zone 7 or 8 is been
set up as smoke sensor/ gas
sensor zones, the system
will have fire alarm and
gas leaking alarm function
24 hours no matter if
the system is armed
or disarmed.
12. If user forget the
password, can reset and
recover preset, out of
factory password 1234.
|