|
1. Must input correct password to arm or disarm this system.
2.
When this system is armed, if someone try to invade, this
system will initiate siren first then dialing out to user. Users
can setup two groups of phone number. If one line is busy the
system will automatically dialing the other one (Two cycles for
each group of telephone numbers). After user picks up the call,
the system will send out one of the prerecorded voices according
to event.
3.
No matter if the system is armed/disarmed, push emergency
key will always initiate the system alarm procedure.
4.
After the system is armed, the only way to disarm is
inputting correct password. There is no other way including
physical damage to disarm the system.
5.
This system does have anti-tampering function. Physical
damage to the system will initiate alarm procedure.
6.
User can change the system set up by themselves. Such as
zone bypass, turn on/off the siren, password, entry/exit delay
time, phone numbers, etc. Important default can add extra secret
code protection.
7.
This system has a LCD screen guide, easy to operate.
8.
Zones can be selectively armed.
9.
Auto battery charging, with a dedicated chip which manage
charging and discharging of the batteries. When power is off,
battery will keep system.
10.
There is battery voltage warning function.
11.
If zone 7 or 8 is been set up as smoke sensor/ gas sensor
zones, the system will have fire alarm and gas leaking alarm
function 24 hours no matter if the system is armed or disarmed.
12.
BJQ-001B system equipped with a wireless receiving
module, can add 8 wireless alarm zones.
13.
If user forget the password, can reset and recover
preset, out of factory password 1234.
|
.jpg){kind=small}
