1.         Wireless design for easy system installation.

2.         10 wireless alarm zones，user is free to chose zone attributes, such as : "Security" or "fire."

3.         20 seconds of user self-recording time. Control board will send out the self-recorded voice message when there is an alarm.

4.         Shielding function. User can shield some zones while other zones are armed.

5.         The siren warning. The built in siren can reach 110db.

6.         Emergency push key. If an emergency happened and the system is disarmed, just push the emergency key on the control board, or the remote, and the system will initiate the alarm procedure.

7.         The anti-tampering function. When shell of the main control board is damaged, the system will issue a siren warning and call out to reach the user or control center.

8.         Priority line function. If there is a call when the system is initiated, the system will obtain the phone line priority to call out first.

9.         Internal 7.4V lithium batteries, with a dedicated chip which manage charging and discharging of the batteries. When AC power is on, the battery will be charged. When the AC power is off, the system automatically shifts to the battery backup supply. There is a battery low voltage warning function.

10.     Event record function. The alarm records up to 10 events. Information including warning type, warning date / time, warning zone, and telephone dialing out information. According to the "first in first out" rule to keep up to 10 of the last events.

11.     Password is a 4-digit number, set up by the user. If the user forgets the password, the factory default code of 1234 can be restored, then the user can set up the password again.

12.     4 call out phone numbers; up to total 14 digits each can be stored. The first three groups are for the user’s pre recorded message to be sent, and the last group is for calling a standard control center.

13.     Long-distance telephone surveillance. Can do distance control via telephone keys. User can arm/disarm system, listen to the field noise, play recoded voice, check initiated alarm status/type through the remote phone keypad.

14.     Dot matrix display characters. Instant system status display, and operating guide on the display, which is easy to use.

15.     Powerful "programmable functions" which makes the system very flexible and practical. Within the programmable functions are: "user password", "entry delay", "exit delay", "call out telephone numbers (four groups)," "zone shielding”," zone function definition"," calendar / clock "," auto arm/disarm ", " siren set up “. Step by step instruction on the LCD make complicated "programmable functions" very easy.  

16.     Electronic calendar / clock function

17.     Programmable timing arm/disarm function.

18.     Non-volatile memory. Power off will not cause data loss or alarm failure, while the battery provides power.

19. Can been used as independent system, or connect to control center with ID Protocol standards and Ademco ® networking