|
Product Description
This intelligent alarm system
uses an advanced microprocessor as its control center, it
execute functions such as guarding against theft, reporting
robbery, smoke and gas leaks using telephone communications.
This alarm system is very reliable and easy to operate; it is
best security choice for banks, shops, warehouses, offices,
homes, etc.
This system monitors up to 10
wireless alarm zones. It uses one main control board, which can
control door/window sensors, wireless infrared motion sensor,
wireless double reflection sensor, smoke detector, gas detector,
wireless glass broken sensor and back up power. Users can select
functions and sensors according to their own needs. For example,
install door/window sensors at doors and windows, install
wireless infrared motion sensor at indoor halls and bedrooms,
install smoke detectors and gas detectors in the kitchen. When
you are not at home, arm the system, then all the sensors will
be monitored by the system. If there is abnormal situation，the
control main board will sound the siren first, which will scare
away intruders and ask for attention from neighbors, then
simultaneously dialing out to user or dialing to the control
center according to phone numbers set up by the user.
Technical
Specification
1.
Power:220V~110VAC±10%
, Power consumption 1W，
2.
RF frequency: 433.92MHZ
3.
Receiving sensitivity: 103db
Transmitting power:3W
4.
DC supply power :Static 0.6W，While
Transmitting, 4W
5.
Internal back up power: two Li-Ion
(7.4V/700mAh each)
6.
Standard Siren sound output, 110db,
Voltage =6-12V
7.
Operating Environment：Temperature:-10～50℃
Relative Humidity:＜80%
8.
DTMF frequency signal generator
output correspondence table:
|
Digit |
Frequency (Hz) |
Digit |
Frequency (Hz) |
|
1 |
697+1209 |
B |
770+1633 |
|
2 |
697+1336 |
C |
852+1633 |
|
3 |
697+1477 |
D |
941+1633 |
|
4 |
770+1209 |
__ |
697 |
|
5 |
770+1336 |
__ |
770 |
|
6 |
770+1477 |
__ |
852 |
|
7 |
852+1209 |
__ |
941 |
|
8 |
852+1336 |
__ |
1209 |
|
9 |
852+1477 |
__ |
1336 |
|
0 |
941+1336 |
__ |
1477 |
|
* |
941+1209 |
__ |
1633 |
|
# |
941+1477 |
DTMF OFF |
-- |
|
A |
697+1633 |
|
|
specification download |
Function introduction
1.
Wireless design for easy system
installation.
2.
10 wireless alarm zones，user
is free to chose zone attributes, such as : "Security" or
"fire."
3.
20 seconds of user self-recording
time. Control board will send out the self-recorded voice
message when there is an alarm.
4.
Shielding function. User can shield
some zones while other zones are armed.
5.
The siren warning. The built in
siren can reach 110db.
6.
Emergency push key. If an emergency
happened and the system is disarmed, just push the emergency key
on the control board, or the remote, and the system will
initiate the alarm procedure.
7.
The anti-tampering function. When
shell of the main control board is damaged, the system will
issue a siren warning and call out to reach the user or control
center.
8.
Priority line function. If there is
a call when the system is initiated, the system will obtain the
phone line priority to call out first.
9.
Internal 7.4V lithium batteries,
with a dedicated chip which manage charging and discharging of
the batteries. When AC power is on, the battery will be charged.
When the AC power is off, the system automatically shifts to the
battery backup supply. There is a battery low voltage warning
function.
10.
Event record function. The alarm
records up to 10 events. Information including warning type,
warning date / time, warning zone, and telephone dialing out
information. According to the "first in first out" rule to keep
up to 10 of the last events.
11.
Password is a 4-digit number, set
up by the user. If the user forgets the password, the factory
default code of 1234 can be restored, then the user can set up
the password again.
12.
4 call out phone numbers; up to
total 14 digits each can be stored. The first three groups are
for the user’s pre recorded message to be sent, and the last
group is for calling a standard control center.
13.
Long-distance telephone
surveillance. Can do distance control via telephone keys. User
can arm/disarm system, listen to the field noise, play recoded
voice, check initiated alarm status/type through the remote
phone keypad.
14.
Dot matrix display characters.
Instant system status display, and operating guide on the
display, which is easy to use.
15.
Powerful "programmable functions"
which makes the system very flexible and practical. Within the
programmable functions are: "user password", "entry delay",
"exit delay", "call out telephone numbers (four groups)," "zone
shielding”," zone function definition"," calendar / clock ","
auto arm/disarm ", " siren set up “. Step by step instruction on
the LCD make complicated "programmable functions" very easy.
16.
Electronic calendar / clock
function
17.
Programmable timing arm/disarm
function.
18.
Non-volatile memory. Power off will
not cause data loss or alarm failure, while the battery provides
power.
19. Can been used as
independent system, or connect to control center with ID
Protocol standards and Ademco ® networking
|
