上海艾美克电子有限公司中文

SHANGHAI ANC ELECTRONIC TECHNOLOGY CO.,LTD

ISO9001-2000 , Chinese CCC certification, CE certification  

 

Security System

Wired Alarm Syetem ( BJQ-001A )

 

 

Wired/Wireless Alarm Syetem ( BJQ-001B )

 

 

Wirelwss Alarm Syetem ( BJQ-001C )

 

 

Wireless Alarm System(BJQ-001D)

 

 

Detector

 

 

Solar Energy Irrigation System

Single wired solar auto irrigation system

 

 

Wireless Group Irrgation

 

 

certification

configuration list

60 HeXiang Rd, BeiHe Industry Park(A), QingPu County, Shanghai    201709   

P: 011 8621  5974-1048, 5974-0579, 5974-1131.       F: 011 8621  5974-1132

e-mail:sales@anctech.com.cn

   

 

Wired alarm system

Model:BJQ-001A

Main technical specifications:

  •     Power :220V~110VAC ±10%, static power:6.3W,transmission power:7.9W

  •     Receiving sensitivity: -103db

  •     DC power, static power:2.0W, transmission power: 5.5W

  •     Back up power: 12V  2.2AH   battery

  •     Sound level , 110db

  •     Environment for use: Temperature-10~50 ℃; Relative humidity: <80%

  •    Communication line length Between the host and operation panel:100 meters, four copper core, per copper core diameter about 0.4mm~0.6mm.

  •     Host box is made of 1mm thick iron sheet, size is 220mm*50mm*140mm.

  •    Have three V+ ports (parallel    connection), Max current 400mA, short circuit protected.

 

 

 

 

 

Function introduction

1. Must input correct password to arm or disarm this system.

2. When this system is armed, if someone try to invade, this system will initiate siren first then dialing out to user. Users can setup two groups of phone number. If one line is busy the system will automatically dialing the other one (Two cycles for each group of telephone numbers). After user picks up the call, the system will send out one of the prerecorded voices according to event.

3.  No matter if the system is armed/disarmed, push emergency key will always initiate the system alarm procedure.

4.  After the system is armed, the only way to disarm is inputting correct password. There is no other way including physical damage to disarm the system.  

5.  This system does have anti-tampering function. Physical damage to the system will initiate alarm procedure.

6.  User can change the system set up by themselves. Such as zone bypass, turn on/off the siren, password, entry/exit delay time, phone numbers, etc. Important default can add extra secret code protection.

7.  This system has a LCD screen guide, easy to operate.

8.  Zones can be selectively armed.

9.  Auto battery charging, with a dedicated chip which manage charging and discharging of the batteries. When power is off, battery will keep system.

10. There is battery voltage warning function.

11. If zone 7 or 8 is been set up as smoke sensor/ gas sensor zones, the system will have fire alarm and gas leaking alarm function 24 hours no matter if the system is armed or disarmed.

12. If user forget the password, can reset and recover preset, out of factory password 1234.

 

back to home